##------------------------------------------------------------ -*- makefile -*-
## The following section of this makefile comes from the
## `./config/conclude' file which was generated with config.status
## from `./config/conclude.in'.
##-----------------------------------------------------------------------------

## This is the target for the library described in the main body of the
## makefile.
##
lib: $(LIB)
$(LIB) __no_library__: $(LIB_OBJ)
	@$(LT_LINK_LIB) -o $@ $(CFLAGS) $(LIB_OBJ) $(LDFLAGS) $(LIBS)
	@for d in X $(SUBDIRS); do                                      \
	    if test $$d != X; then                                      \
	        (set -x; cd $$d && $(MAKE) lib) || exit 1;              \
	    fi;                                                         \
	done

progs: $(LIB) $(PROGS)
	@for d in X $(SUBDIRS); do                                      \
	    if test $$d != X; then                                      \
	        (set -x; cd $$d && $(MAKE) progs) || exit 1;            \
	    fi;                                                         \
	done

## Build a tags file in this directory.
##
TAGS: $(LIB_SRC)
	$(RM) $@
	-etags $(LIB_SRC)

## Runs each test in order, passing $(TEST_FLAGS) to the program.
## Since tests are done in a shell loop, "make -i" does apply inside it.
## Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
##
tests: $(TEST_PROGS) $(LIB)
check test _test: tests
	@for test in $(TEST_PROGS) dummy; do                                  \
	   if test $$test != dummy; then				      \
	      echo "============================";			      \
	      echo "Testing $$test $(TEST_FLAGS)";			      \
	      echo "============================";			      \
	      srcdir="$(srcdir)"					      \
		 $(RUNTEST) ./$$test $(TEST_FLAGS) ||			      \
		 (test $$HDF5_Make_Ignore && echo "*** Error ignored") ||     \
		 break;							      \
	      echo "";							      \
	   fi;								      \
	done;								      \
	test $$test = dummy || false
	@for test in $(TEST_SCRIPTS) dummy; do                                \
	   if test $$test != dummy; then				      \
	      echo "============================";			      \
	      echo "Testing $$test $(TEST_FLAGS)";			      \
	      echo "============================";			      \
	      RUNSERIAL="$(RUNSERIAL)" 					      \
	         srcdir="$(srcdir)"					      \
		 /bin/sh $$test $(TEST_FLAGS) ||		              \
		 (test $$HDF5_Make_Ignore && echo "*** Error ignored") ||     \
		 break;							      \
	      echo "";							      \
	   fi;								      \
	done;								      \
	test $$test = dummy || false
	@for d in X $(SUBDIRS); do                                      \
	    if test $$d != X; then                                      \
	        (set -x; cd $$d && $(MAKE) tests) || exit 1;            \
	    fi;                                                         \
	done

## Make installation directories directories if they don't exist.
##
$(libdir):
	$(top_srcdir)/bin/mkdirs $@

$(includedir):
	$(top_srcdir)/bin/mkdirs $@

$(bindir):
	$(top_srcdir)/bin/mkdirs $@

## Install the library, the public header files, and public programs.
##
install: $(PUB_LIB) $(PUB_HDR) $(PUB_PROGS) $(libdir) $(includedir) $(bindir)
	@for f in X $(PUB_LIB); do					      \
	   if test $$f != X; then					      \
	      ($(LT_INSTALL_LIB) $$f $(libdir)/. || exit 1);		      \
	   fi;								      \
	done
	@if test -f libhdf5.settings; then				      \
	   (set -x; $(INSTALL_DATA) libhdf5.settings $(libdir)/. || exit 1);  \
	fi
	@for f in X $(PUB_HDR); do					      \
	   if test $$f != X; then					      \
	      if test -f $$f; then					      \
		 (set -x; $(INSTALL_DATA) $$f $(includedir)/. || exit 1);     \
	      else							      \
	         (set -x; $(INSTALL_DATA) $(srcdir)/$$f $(includedir)/. ||    \
		    exit 1);						      \
	      fi;							      \
	   fi;								      \
	done
	@for f in X $(PUB_PROGS); do					      \
	   if test $$f != X; then					      \
	     ($(LT_INSTALL_PROG) $$f $(bindir)/. || exit 1);		      \
	   fi;							              \
	done
	@for d in X $(SUBDIRS); do                                            \
	    if test $$d != X; then                                            \
	       (set -x; cd $$d && $(MAKE) $@) || exit 1;                      \
	    fi;                                                               \
	done

## Install the documents.
##
install-doc: $(PUB_DOCS)
	@if test -n "$(DOCDIR)"; then                                         \
	    if test -d "$(DOCDIR)"; then                                      \
	       :;                                                             \
	    else                                                              \
	       mkdir $(DOCDIR) && chmod 755 $(DOCDIR);                        \
	    fi;                                                               \
	fi
	@if test -n "$(SUBDOCDIR)"; then                                      \
	    if test -d "$(SUBDOCDIR)" ; then                                  \
	       :;                                                             \
	    else                                                              \
	       mkdir $(SUBDOCDIR) && chmod 755 $(SUBDOCDIR);                  \
	    fi;                                                               \
	fi
	@for d in X $(SUBDIRS); do                                            \
	   if test $$d != X; then                                             \
	      (set -x; cd $$d && $(MAKE) $@) || exit 1;                       \
	   fi;                                                                \
	done
	@for f in X $(PUB_DOCS); do                                           \
	   if test $$f != X; then                                             \
	      if test -f $$f; then                                            \
		 (set -x; $(INSTALL_DATA) $$f $(DOCDIR)/. || exit 1);         \
	      else                                                            \
	         (set -x; $(INSTALL_DATA) $(srcdir)/$$f $(DOCDIR)/. ||        \
		    exit 1);                                                  \
	      fi;                                                             \
	   fi;                                                                \
	done
	@for f in X $(PUB_SUBDOCS); do                                        \
	   if test $$f != X; then                                             \
	      if test -f $$f; then                                            \
		 (set -x; $(INSTALL_DATA) $$f $(SUBDOCDIR)/. || exit 1);      \
	      else                                                            \
	         (set -x; $(INSTALL_DATA) $(srcdir)/$$f $(SUBDOCDIR)/. ||     \
		    exit 1);                                                  \
	      fi;                                                             \
	   fi;                                                                \
	done

## Removes those things that `make install' (would have) installed.
##
uninstall:
	@for f in libhdf5.settings $(LIB); do				      \
            $(LT_UNINSTALL) $(libdir)/$$f;				      \
	done
	@if test -n "$(PUB_HDR)"; then                                        \
	   set -x; cd $(includedir) && $(RM) $(PUB_HDR);		      \
	fi
	@for f in X $(PUB_PROGS); do					      \
	    if test $$f != X; then					      \
	        $(LT_UNINSTALL) $(bindir)/$$f;				      \
	    fi;								      \
	done

## Removes those things that `make install-doc' (would have) installed.
##
uninstall-doc:
	@for d in X $(SUBDIRS); do					      \
	    if test $$d != X; then					      \
	       (set -x; cd $$d && $(MAKE) $@) || exit 1;                      \
	    fi;								      \
	done
	@if test -n "$(PUB_DOCS)"; then 				      \
	   set -x; cd $(DOCDIR) && $(RM) $(PUB_DOCS);			      \
	fi

## Removes temporary files without removing the final target files.  That is,
## remove things like object files but not libraries or executables.
##
mostlyclean:
	@for d in X $(SUBDIRS); do                                            \
	    if test $$d != X; then                                            \
	        (set -x; cd $$d; $(MAKE) $@) || exit 1;                       \
	    fi;                                                               \
	done
	@if test -n "$(LIB_OBJ)"; then                                        \
	    $(RM) $(LIB_OBJ) $(LIB_OBJ:.lo=.o);                              \
	fi
	@if test -n "$(TEST_OBJ)"; then                                       \
	    $(RM) $(TEST_OBJ) $(TEST_OBJ:.lo=.o);                            \
	fi
	@if test -n "$(PROG_OBJ)" || test -n "$(MOSTLYCLEAN)"; then           \
	    $(RM) $(PROG_OBJ) $(PROG_OBJ:.lo=.o) $(MOSTLYCLEAN);             \
	fi

## Like `mostlyclean' except it also removes the final targets: things like
## libraries and executables.  This target doesn't remove any file that
## is part of the HDF5 distribution.
##
clean: mostlyclean
	@for d in X $(SUBDIRS); do                                            \
	    if test $$d != X; then                                            \
	        (set -x; cd $$d; $(MAKE) $@) || exit 1;                       \
	    fi;                                                               \
	done
	@if test -n "$(LIB)" -o -n "$(TEST_PROGS)" -o -n "$(PROGS)" -o -n "$(CLEAN)"; then \
	    $(RM) $(LIB) $(TEST_PROGS) $(PROGS) $(CLEAN);                     \
	fi;
	-$(RM) -r .libs

## Like `clean' except it also removes files that were created by running
## configure.  If you've unpacked the source and built HDF5 without creating
## any other files, then `make distclean' will leave only the files that were
## in the distribution.
##
distclean: clean
	-$(RM) .depend TAGS *~ core *.core *.bak *.old *.new $(DISTCLEAN)
	@for d in X $(SUBDIRS); do                                            \
	    if test $$d != X; then                                            \
	        (set -x; cd $$d; $(MAKE) $@) || exit 1;                       \
	    fi;                                                               \
	done
	@if test -f $(srcdir)/Makefile.in; then				      \
	   (set -x; $(RM) Makefile);					      \
	fi

## Like `distclean' except it deletes all files that can be regenerated from
## the makefile, including those generated from autoheader and autoconf.
##
maintainer-clean: distclean
	@for d in X $(SUBDIRS); do                                            \
	    if test $$d != X; then                                            \
	        (set -x; cd $$d; $(MAKE) $@) || exit 1;                       \
	    fi;                                                               \
	done
	-$(RM) *~ core core.* *.core *.bak *.contrib gmon.out

## Implicit rules
##
.c.o:
	$(CC) $(CFLAGS) $(CPPFLAGS) -c $<

.c.lo:
	@$(LT_COMPILE) $(CFLAGS) $(CPPFLAGS) -c $<

##-----------------------------------------------------------------------------
## The following section of this makefile contains dependencies between the
## source files and the header files.
##-----------------------------------------------------------------------------
.PHONY: dep depend
dep depend: $(srcdir)/Dependencies

@DEPEND@
