#! /bin/sh
#
# Copyright by The HDF Group.
# Copyright by the Board of Trustees of the University of Illinois.
# All rights reserved.
#
# This file is part of HDF5.  The full HDF5 copyright notice, including
# terms governing use, modification, and redistribution, is contained in
# the COPYING file, which can be found at the root of the source code
# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.
# If you do not have access to either file, you may request a copy from
# help@hdfgroup.org.
#
# Tests for the h5mkgrp tool
#
# Quincey Koziol (koziol@hdfgroup.org)
# Tuesday, February 13, 2007
#

srcdir=@srcdir@

TESTNAME=h5mkgrp
EXIT_SUCCESS=0
EXIT_FAILURE=1

H5MKGRP=h5mkgrp             # The tool name
H5MKGRP_BIN=`pwd`/$H5MKGRP  # The path of the tool binary
H5LS=h5ls                   # The h5ls tool name 
H5LS_ARGS=-vr               # Arguments to the h5ls tool
H5LS_BIN=`pwd`/../h5ls/$H5LS # The path of the h5ls tool binary

RM='rm -rf'
CMP='cmp'
DIFF='diff -c'
CP='cp'
DIRNAME='dirname'
LS='ls'
AWK='awk'

nerrors=0
verbose=yes

# source dirs
SRC_TOOLS="$srcdir/../"

SRC_TOOLS_TESTFILES="$SRC_TOOLS/testfiles"
# testfiles source dirs for tools
SRC_H5MKGRP_TESTFILES="$SRC_TOOLS/misc/testfiles"

TESTDIR=./testgrp
test -d $TESTDIR || mkdir -p $TESTDIR

######################################################################
# test files
# --------------------------------------------------------------------
# All the test files copy from source directory to test directory
# NOTE: Keep this framework to add/remove test files.
#       Any test files from other tools can be used in this framework.
#       This list are also used for checking exist.
#       Comment '#' without space can be used.
# --------------------------------------------------------------------

CMP='cmp -s'
DIFF='diff -c'

#
# copy test files and expected output files from source dirs to test dir
#
COPY_TESTFILES="
$SRC_H5MKGRP_TESTFILES/h5mkgrp_help.txt
$SRC_TOOLS_TESTFILES/h5mkgrp_single.ls
$SRC_TOOLS_TESTFILES/h5mkgrp_single_v.ls
$SRC_TOOLS_TESTFILES/h5mkgrp_single_p.ls
$SRC_TOOLS_TESTFILES/h5mkgrp_single_l.ls
$SRC_TOOLS_TESTFILES/h5mkgrp_several.ls
$SRC_TOOLS_TESTFILES/h5mkgrp_several_v.ls
$SRC_TOOLS_TESTFILES/h5mkgrp_several_p.ls
$SRC_TOOLS_TESTFILES/h5mkgrp_several_l.ls
$SRC_TOOLS_TESTFILES/h5mkgrp_nested_p.ls
$SRC_TOOLS_TESTFILES/h5mkgrp_nested_lp.ls
$SRC_TOOLS_TESTFILES/h5mkgrp_nested_mult_p.ls
$SRC_TOOLS_TESTFILES/h5mkgrp_nested_mult_lp.ls
"

COPY_TESTFILES_TO_TESTDIR()
{
    # copy test files. Used -f to make sure get a new copy
    for tstfile in $COPY_TESTFILES
    do
        # ignore '#' comment
        echo $tstfile | tr -d ' ' | grep '^#' > /dev/null
        RET=$?
        if [ $RET -eq 1 ]; then
            # skip cp if srcdir is same as destdir
            # this occurs when build/test performed in source dir and
            # make cp fail
            SDIR=`$DIRNAME $tstfile`
            INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
            INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
            if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
                $CP -f $tstfile $TESTDIR
                if [ $? -ne 0 ]; then
                    echo "Error: FAILED to copy $tstfile ."

                    # Comment out this to CREATE expected file
                    exit $EXIT_FAILURE
                fi
            fi
        fi
    done
}

CLEAN_TESTFILES_AND_TESTDIR()
{
    # skip rm if srcdir is same as destdir
    # this occurs when build/test performed in source dir and
    # make cp fail
    SDIR=$SRC_H5MKGRP_TESTFILES
    INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
    INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
    if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
        $RM $TESTDIR
    fi
}

# Print a line-line message left justified in a field of 70 characters
# beginning with the word "Testing".
TESTING()
{
    SPACES="                                                               "
    echo "Testing $* $SPACES" |cut -c1-70 |tr -d '\012'
}

# Source in the output filter function definitions.
. $srcdir/../../bin/output_filter.sh 

# Print a line-line message left justified in a field of 70 characters
# beginning with the word "Verifying".
#
VERIFY_H5LS()
{
    SPACES="                                                               "
    echo "Verifying h5ls file structure $* $SPACES" | cut -c1-70 | tr -d '\012'
}

# Run a test and print PASS or *FAIL*. If h5mkgrp can complete
# with exit status 0, consider it pass. If a test fails then increment
# the `nerrors' global variable.
# Assumed arguments:
# $* arguments for h5mkgrp.

TOOLTEST()
{
    TESTING $H5MKGRP $@
    (
    cd $TESTDIR
    $RUNSERIAL $H5MKGRP_BIN $@
    ) > output.out
    RET=$?
    if [ $RET != 0 ]; then
        echo "*FAILED*"
        echo "failed result is:"
        cat output.out
        nerrors="`expr $nerrors + 1`"
    else
        echo " PASSED"

        # Clean up output file
        if test -z "$HDF5_NOCLEANUP"; then
           rm -f output.out
        fi
    fi
}

# Call the h5ls tool to verify the correct output data in the destination file
#
H5LSTEST()
{
    expect="$TESTDIR/`basename $1 .h5`.ls"
    actual="$TESTDIR/`basename $1 .h5`.out"
    actual_sav=${actual}-sav

    # Stderr is included in stdout so that the diff can detect
    # any unexpected output from that stream too.
    VERIFY_H5LS  $@
    (
      cd $TESTDIR
      $RUNSERIAL $H5LS_BIN $H5LS_ARGS $@
    ) 2>&1 |sed 's/Modified:.*/Modified:  XXXX-XX-XX XX:XX:XX XXX/' >$actual

    # save actual in case it is needed later.
    cp $actual $actual_sav
    STDOUT_FILTER $actual
    STDERR_FILTER $actual

   if [ ! -f $expect ]; then
      # Create the expect file if it doesn't yet exist.
      echo " CREATED"
      cp $actual $expect
      echo "    Expected result (*.ls) missing"
      nerrors="`expr $nerrors + 1`"
   elif $CMP $expect $actual; then
      echo " PASSED"
   else
      echo "*FAILED*"
      echo "    Expected result (*.ls) differs from actual result (*.out)"
      nerrors="`expr $nerrors + 1`"
      test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/    /'
   fi

   # Clean up output file
   if test -z "$HDF5_NOCLEANUP"; then
      rm -f $actual $actual_sav
   fi
}

# Single run of tool
#
# Assumed arguments:
# $1 is test file name
# $2 is h5mkgrp options
# $* are groups to create
RUNTEST()
{
    FILEOUT=$1
    shift
    H5MKGRP_ARGS=$1
    shift

    # Remove any output file left over from previous test run
    rm -f $FILEOUT

    # Run test
    TOOLTEST $H5MKGRP_ARGS $FILEOUT $@

    # Verify that the file created above is correct
    H5LSTEST $FILEOUT

    # Remove output file created, if the "no cleanup" environment variable is
    #   not defined
    if test -z "$HDF5_NOCLEANUP"; then
        rm -f $TESTDIR/$FILEOUT
    fi
}

# Single run of tool
#
# Assumed arguments:
# $1 is test expected output file
# $2 is h5mkgrp options
# $* are groups to create
CMPTEST()
{
    FILEOUT=$1
    expect="$TESTDIR/`basename $1 .h5`.txt"
    actual="$TESTDIR/`basename $1 .h5`.out"
    actual_err="$TESTDIR/`basename $1 .h5`.err"
    shift

    # Stderr is included in stdout so that the diff can detect
    # any unexpected output from that stream too.
    TESTING $H5MKGRP $@
    (
    cd $TESTDIR
    $RUNSERIAL $H5MKGRP_BIN $@
    ) >$actual 2>$actual_err
    cat $actual_err >> $actual

   if [ ! -f $expect ]; then
    # Create the expect file if it doesn't yet exist.
      echo " CREATED"
      cp $actual $expect
      echo "    Expected result (*.txt) missing"
      nerrors="`expr $nerrors + 1`"
   elif $CMP $expect $actual; then
      echo " PASSED"
   else
      echo "*FAILED*"
      echo "    Expected result (*.txt) differs from actual result (*.out)"
      nerrors="`expr $nerrors + 1`"
      test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/    /'
   fi

   # Clean up output file
   if test -z "$HDF5_NOCLEANUP"; then
      rm -f $actual $actual_err
   fi
}

##############################################################################
###           T H E   T E S T S                                            ###
##############################################################################
# prepare for test
COPY_TESTFILES_TO_TESTDIR

# Check that help & version is displayed properly
CMPTEST h5mkgrp_help.h5 "-h"
#CMPTEST h5mkgrp_version.h5 "-V"

# Create single group at root level
RUNTEST h5mkgrp_single.h5 " " single
RUNTEST h5mkgrp_single_v.h5 "-v" single
RUNTEST h5mkgrp_single_p.h5 "-p" single
RUNTEST h5mkgrp_single_l.h5 "-l" latest

# Create several groups at root level
RUNTEST h5mkgrp_several.h5 " " one two
RUNTEST h5mkgrp_several_v.h5 "-v" one two
RUNTEST h5mkgrp_several_p.h5 "-p" one two
RUNTEST h5mkgrp_several_l.h5 "-l" one two

# Create various nested groups
RUNTEST h5mkgrp_nested_p.h5 "-p" /one/two
RUNTEST h5mkgrp_nested_lp.h5 "-lp" /one/two
RUNTEST h5mkgrp_nested_mult_p.h5 "-p" /one/two /three/four
RUNTEST h5mkgrp_nested_mult_lp.h5 "-lp" /one/two /three/four

# Clean up temporary files/directories
CLEAN_TESTFILES_AND_TESTDIR

if test $nerrors -eq 0 ; then
    echo "All $TESTNAME tests passed."
    exit $EXIT_SUCCESS
else
    echo "$TESTNAME tests failed with $nerrors errors."
    exit $EXIT_FAILURE
fi